How to distinguish a good injection molding meal box?

With the rapid pace of life, disposable injection box has become one of the essential products in people's life. Most take-out restaurants use disposable plastic injection boxes, which have been praised for their portability and heating. For restaurants and other catering related industries, to achieve customer satisfaction, it is particularly important to choose a suitable and good quality disposable injection molding meal box.

Today, Suzhou plastic beauty packaging to tell you about the choice of a good meal box to pay attention to which points.

First, look at the sanitary conditions

Disposable injection molded meal boxes are generally packed in a single pile with PE film bags, and then uniformly equipped in cartons. We need to check whether the PE film bag is tightly packed and the outer packing carton is complete.

In addition, we need to check whether the manufacturer, production date, shelf life, production license and other relevant information are clearly marked on the outer packing carton. If THE INFORMATION IS NOT PERFECT, it is very likely that it is made in the black workshop, which does not conform to national health standards, and it can also be judged to be a bad one-time meal box.

Second, look at the sealing

Generally speaking, as a carrier of food, the sealing property of disposable injection box is particularly important for the bumps in the transportation process. So, how to judge the sealing of a disposable injection box is good? We can fill the lunchbox with hot water, shake it back and forth and turn it upside down to see if it leaks. If, after a series of operations will not leak, or only a small amount of water leakage, it can be judged that the sealing of this meal box is better.

Three, look at product quality

We can first check the body of the disposable injection box. The body should be uniform in color, and there should be no foreign matter, black marks, bubbles and other adverse phenomena. In addition, we should look at the box opening. The box mouth should be smooth and even, without burrs and burrs. We can also squeeze the body of the box by hand to see how tough it is. Try to choose the disposable injection molding box with thick box wall, which is conducive to deal with the bumps and other problems in the process of delivery, and is more durable and portable.